抽象的

Fabrication of Selected Metal Powder Composite Electrode for Landfill Leachate Treatment using Electrochemical Method

Majd Ahmed Jumaah, Mohamed Rozali Othman and Zuhailie Zakaria


Landfill leachate is a major source of pollution caused by the wastewater generated from solid waste buried underground. Electrochemical oxidation processes, is one of the environmental friendly technologies in landfill leachate treatment processes. In this research, several composite electrodes of metal powder (Fe, Pt, Ni, Co, Cu, Al, Ag) with PVC were used by mixing together a weighed portion of metal powder and PVC in THF as a solvent. The mixture were then swirled until the suspension was homogeneous and drying the suspension in an oven at 100oC for 3 hr. The dry sample was then placed in a 1 cm diameter stainless steel mould and pressed at 10 ton/cm2. The ready composite electrodes were then used as a working electrode to treat a leachate samples using electrolysis method with stainless steel as the counter electrode. The results showed a composition of Pt85-PVC15 was the best electrode, which gavethe removal percentage of color, COD and NH3-N are 99, 98 and 91%, respectively. The optimum operating conditions were sodium chloride concentration of 1.2% (w/v) as a supporting electrolyte, applied voltage of 10 V and operating time of 90 min.


免责声明: 此摘要通过人工智能工具翻译,尚未经过审核或验证

索引于

  • 中国社会科学院
  • 谷歌学术
  • 打开 J 门
  • 中国知网(CNKI)
  • 引用因子
  • 宇宙IF
  • 电子期刊图书馆
  • 研究期刊索引目录 (DRJI)
  • 秘密搜索引擎实验室
  • ICMJE

查看更多

期刊国际标准号

期刊 h 指数

Flyer